Billion BiPac VDSL Modems | ezynbn Settings for FTTN (fibre to the node)
Service Type: VDSL on PTM Interface
Connection Type: PPPoE
VLAN ID: 100
Password: your ezynbn password
Authentication Method: AUTO
IPv4 Address: Static (enter your static IP address in the available field)
Obtain DNS: Use WAN Interface
Or you can choose to enter manual DNS entries, but this is not necessary. If you decide to do so, enter the following:
IPv6 for this service: ensure Enable is unticked
Please ensure you disable both the SIP ALG and the h.323 ALG because these will cause problems if you're planning to use VoIP.
You will find these settings under Configuration > NAT > ALG.
Manual Settings for all Modems using VDSL (for NBN)
Service Type: VDSL Port: DSL Connection Type: PPPoE Priority: -1 (not required) VLAN...
Manual Settings for all Modems using ADSL or ADSL2+
Service Type: ADSL/ADSL2+ Port: DSL Connection Type: PPPoA VPI / VCI: 8 / 35...
Quality of Service (QoS) Configuration for VoIP
Go to Network setup > QoS > QoS Policy Select “Add entry” and configure the...