Manual Settings for all Modems using ADSL or ADSL2+
Service Type: ADSL/ADSL2+
Connection Type: PPPoA
VPI / VCI: 8 / 35
Encapsulation Mode: VC/MUX
Password: your ezybroadband password
Authentication Method: AUTO
IPv4 Address: Static (enter your static IP address in the available field)
Obtain DNS: Automatically
If manual DNS entries are required by your modem, use:
NOTE: If your modem/router has ALG (application layer gateway) features, please ensure that you disable both the SIP ALG and the h.323 ALG because these will cause problems if you're planning to use VoIP.
Manual Settings for all Modems using VDSL (for NBN)
Service Type: VDSL Port: DSL Connection Type: PPPoE Priority: -1 (not required) VLAN...
Billion BiPac VDSL Modems | ezynbn Settings for FTTN (fibre to the node)
Service Type: VDSL on PTM Interface...
Quality of Service (QoS) Configuration for VoIP
Go to Network setup > QoS > QoS Policy Select “Add entry” and configure the...