Manual Settings for all Modems using VDSL (for NBN)
Service Type: VDSL
Connection Type: PPPoE
Priority: -1 (not required)
VLAN ID: -1 (not required)
Username: as supplied, eg, firstname.lastname@example.org
Password: as supplied
Authentication Method: AUTO
IPv4 Address: Static (enter your static IP address in the available field)
Obtain DNS: Automatically
If manual DNS entries are required by your modem, use:
NOTE: If your modem/router has ALG (application layer gateway) features and you're planning to use VoIP, disable both SIP ALG and h.323 ALG to prevent future problems.
Quality of Service (QoS) Configuration for VoIP
Go to Network setup > QoS > QoS Policy Select “Add entry” and configure the...
Manual Settings for all Modems using ADSL or ADSL2+
Service Type: ADSL/ADSL2+ Port: DSL Connection Type: PPPoA VPI / VCI: 8 / 35...
Billion BiPac VDSL Modems | ezynbn Settings for FTTN (fibre to the node)
Service Type: VDSL on PTM Interface...