Client Zone Knowledgebase ezybroadband Connect a Sophos Firewall to the NBN

Connect a Sophos Firewall to the NBN

Print
nbn, router, pppoe 0

This guide connects a Sophos Firewall (SFOS 20 or 21) to our NBN service through the NBN box.

Updated 21 November 2026Applies to Sophos routers

What you'll need

  • Your NBN username and password, from the welcome email we sent
  • A computer connected to the router by cable or Wi-Fi
  • The router's sign-in details, usually on a label underneath it

Your NBN settings

Connection typePPPoE
UsernameAs supplied, for example yourname@ezynbn.net.au
PasswordAs supplied
IP addressGet it automatically. If your router has a field for a fixed IP address, enter the static IP address we supplied.
DNSAutomatic. If your router needs them entered: 103.5.90.253 and 103.5.91.253
MTU1492
VLANOff, for most businesses. If you use VLANs: VLAN ID 100, priority 0

Set up the Sophos

  1. Edit the WAN port

    Go to Network > Interfaces and edit the port connected to the NBN box. Its zone must be WAN.

  2. Choose PPPoE

    Under IPv4 configuration, choose PPPoE and enter the username and password. Leave the VDSL switch off.

  3. Set the MTU

    Under Advanced settings, set MTU to 1492, then select Save.

  4. DNS, only if needed

    Go to Network > DNS, choose Static DNS instead of Obtain DNS from PPPoE, enter the two addresses and select Apply.

VLAN

VLAN or no VLAN? If you're not sure, you don't need one: leave VLAN settings off. Use VLAN ID 100 only if your business uses VLANs, or the person who looks after your network asks for it.

No VLAN (most businesses)

Set up PPPoE on the port itself, as above.

Using a VLAN

Add a VLAN interface on the port with VLAN ID 100 and zone WAN, then set its IPv4 configuration to PPPoE with your username and password.

Still not working?

  • Check the username is the whole address, including @ezynbn.net.au, and retype the password.
  • If you turned on a VLAN, try again with it off (or the other way round).
  • Restart the NBN box and the router, then wait two minutes.
  • Still stuck? Open a ticket with your router's make and model, and a photo of the lights on the NBN box.

What's next

Steps follow Sophos Firewall 21.0 help (interfaces and DNS).

Was this guide helpful?

Still stuck?

Send us the details and our team will take it from here

Open Ticket