Client Zone Knowledgebase ezybroadband NBN settings for any router

NBN settings for any router

Print
0

Every router can connect to our NBN service with the same few settings. If your brand has its own guide, use that; otherwise use these settings with your router's manual.

Updated 21 November 2026Applies to any router or modem router

What you'll need

  • Your NBN username and password, from the welcome email we sent
  • A computer connected to the router by cable or Wi-Fi
  • The router's sign-in details, usually on a label underneath it

Your NBN settings

Connection typePPPoE
UsernameAs supplied, for example yourname@ezynbn.net.au
PasswordAs supplied
IP addressGet it automatically. If your router has a field for a fixed IP address, enter the static IP address we supplied.
DNSAutomatic. If your router needs them entered: 103.5.90.253 and 103.5.91.253
MTU1492
VLANOff, for most businesses. If you use VLANs: VLAN ID 100, priority 0

VLAN or no VLAN? If you're not sure, you don't need one: leave VLAN settings off. Use VLAN ID 100 only if your business uses VLANs, or the person who looks after your network asks for it.

Which kind of NBN do you have?

NBN typePlug the router intoRouter needs
Fibre to the premises, HFC (cable), fibre to the curbThe NBN box, using the router's WAN portAny router with PPPoE
Fibre to the node or buildingThe phone socketA modem router with VDSL

Using our phone service too? Turn off SIP ALG and H.323 ALG on the router. See the guide for any router or firewall.

Still not working?

  • Check the username is the whole address, including @ezynbn.net.au, and retype the password.
  • If you turned on a VLAN, try again with it off (or the other way round).
  • Restart the NBN box and the router, then wait two minutes.
  • Still stuck? Open a ticket with your router's make and model, and a photo of the lights on the NBN box.

What's next

Was this guide helpful?

Still stuck?

Send us the details and our team will take it from here

Open Ticket