Client Zone Knowledgebase ezybroadband Connect a SonicWall to the NBN

Connect a SonicWall to the NBN

Print
nbn, router, pppoe 0

This guide connects a SonicWall firewall (SonicOS 7) to our NBN service through the NBN box.

Updated 21 November 2026Applies to SonicWall routers

What you'll need

  • Your NBN username and password, from the welcome email we sent
  • A computer connected to the router by cable or Wi-Fi
  • The router's sign-in details, usually on a label underneath it

Your NBN settings

Connection typePPPoE
UsernameAs supplied, for example yourname@ezynbn.net.au
PasswordAs supplied
IP addressGet it automatically. If your router has a field for a fixed IP address, enter the static IP address we supplied.
DNSAutomatic. If your router needs them entered: 103.5.90.253 and 103.5.91.253
MTU1492
VLANOff, for most businesses. If you use VLANs: VLAN ID 100, priority 0

Set up the SonicWall

  1. Edit the WAN interface

    Go to NETWORK | System > Interfaces and select Edit on the WAN port (usually X1).

  2. Choose PPPoE

    Set Zone to WAN and IP Assignment to PPPoE. Enter the User Name and User Password, choose Obtain IP Address Automatically, then select OK. SonicOS sets the MTU to 1492 automatically.

  3. DNS, only if needed

    Go to Network | DNS > Settings, choose Specify DNS Servers Manually, enter the two addresses and select Accept.

VLAN

VLAN or no VLAN? If you're not sure, you don't need one: leave VLAN settings off. Use VLAN ID 100 only if your business uses VLANs, or the person who looks after your network asks for it.

No VLAN (most businesses)

Set up PPPoE on the WAN port itself, as above.

Using a VLAN

Under Interfaces, add a Virtual Interface (VLAN sub-interface) on the WAN port with Zone WAN and VLAN Tag 100, then set its IP Assignment to PPPoE with your username and password.

Still not working?

  • Check the username is the whole address, including @ezynbn.net.au, and retype the password.
  • If you turned on a VLAN, try again with it off (or the other way round).
  • Restart the NBN box and the router, then wait two minutes.
  • Still stuck? Open a ticket with your router's make and model, and a photo of the lights on the NBN box.

What's next

Steps follow SonicWall's SonicOS 7.1 documentation (WAN interface configuration and DNS).

Was this guide helpful?

Still stuck?

Send us the details and our team will take it from here

Open Ticket