Client Zone Knowledgebase ezybroadband Connect an ASUS router to the NBN

Connect an ASUS router to the NBN

Print
nbn, router, pppoe 0

This guide connects an ASUS router to our NBN service through the NBN box (fibre, HFC or fibre-to-the-curb).

Updated 21 November 2026Applies to ASUS routers

What you'll need

  • Your NBN username and password, from the welcome email we sent
  • A computer connected to the router by cable or Wi-Fi
  • The router's sign-in details, usually on a label underneath it

Your NBN settings

Connection typePPPoE
UsernameAs supplied, for example yourname@ezynbn.net.au
PasswordAs supplied
IP addressGet it automatically. If your router has a field for a fixed IP address, enter the static IP address we supplied.
DNSAutomatic. If your router needs them entered: 103.5.90.253 and 103.5.91.253
MTU1492
VLANOff, for most businesses. If you use VLANs: VLAN ID 100, priority 0

Set up the ASUS

  1. Open the WAN settings

    Sign in to the router, then go to Advanced Settings > WAN > Internet Connection.

  2. Choose PPPoE and sign in

    Set WAN Connection Type to PPPoE. Under Account Settings, enter your Username and Password. MTU is already 1492.

    The ASUS WAN Internet Connection page, with WAN Connection Type set to PPPoE and the Username, Password and MTU fields ringed
  3. DNS, only if needed

    To enter DNS by hand, set Connect to DNS Server automatically to No and fill in DNS Server1 and DNS Server2.

    The WAN DNS Setting section, with DNS Server1 and DNS Server2 fields
  4. Apply

    Select Apply at the bottom of the page.

VLAN

VLAN or no VLAN? If you're not sure, you don't need one: leave VLAN settings off. Use VLAN ID 100 only if your business uses VLANs, or the person who looks after your network asks for it.

No VLAN (most businesses)

Leave LAN > IPTV > Select ISP Profile on None. That's the default.

Using a VLAN

Go to LAN > IPTV, set Select ISP Profile to Manual Setting, and on the Internet row enter VID 100 and PRIO 0. Select Apply.

The LAN IPTV page, with Select ISP Profile set to Manual Setting and the Internet VID 100 and PRIO 0 ringed

Some newer ASUS models have an 802.1Q section on the WAN page instead: set Enable to Yes, VLAN ID to 100, and 802.1P to 0.

Still not working?

  • Check the username is the whole address, including @ezynbn.net.au, and retype the password.
  • If you turned on a VLAN, try again with it off (or the other way round).
  • Restart the NBN box and the router, then wait two minutes.
  • Still stuck? Open a ticket with your router's make and model, and a photo of the lights on the NBN box.

What's next

Steps follow ASUS FAQs 1011715, 1050072 and 1011708 (November 2026). Screenshots are from ASUS's own web interface simulator; your router's screens may look slightly different.

Was this guide helpful?

Still stuck?

Send us the details and our team will take it from here

Open Ticket