Client Zone Knowledgebase ezybroadband Connect a Netgear router to the NBN

Connect a Netgear router to the NBN

Print
nbn, router, pppoe 0

This guide connects a Netgear Nighthawk or Orbi router to our NBN service through the NBN box (fibre, HFC or fibre-to-the-curb).

Updated 21 November 2026Applies to Netgear routers

What you'll need

  • Your NBN username and password, from the welcome email we sent
  • A computer connected to the router by cable or Wi-Fi
  • The router's sign-in details, usually on a label underneath it

Your NBN settings

Connection typePPPoE
UsernameAs supplied, for example yourname@ezynbn.net.au
PasswordAs supplied
IP addressGet it automatically. If your router has a field for a fixed IP address, enter the static IP address we supplied.
DNSAutomatic. If your router needs them entered: 103.5.90.253 and 103.5.91.253
MTU1492
VLANOff, for most businesses. If you use VLANs: VLAN ID 100, priority 0

Set up the Netgear

  1. Sign in to the router

    Go to routerlogin.net (Orbi: orbilogin.com) and sign in.

  2. Open Internet Setup

    On the BASIC Home page, select Internet.

  3. Choose PPPoE

    Set Does your Internet connection require a login? to Yes, and Internet Service Provider to PPPoE. Enter your Login and Password, and set Connection Mode to Always On.

  4. Address and DNS

    Leave Internet IP Address on Get Dynamically from ISP. To enter DNS by hand, choose Use These DNS Servers.

  5. Apply and test

    Select Apply, then Test.

  6. Set the MTU

    Go to ADVANCED > Setup > WAN Setup, set MTU Size to 1492 and select Apply.

VLAN

VLAN or no VLAN? If you're not sure, you don't need one: leave VLAN settings off. Use VLAN ID 100 only if your business uses VLANs, or the person who looks after your network asks for it.

No VLAN (most businesses)

Leave Enable VLAN / Bridge Settings unticked (ADVANCED > Advanced Setup > VLAN / Bridge Settings). That's the default.

Using a VLAN

Go to ADVANCED > Advanced Setup > VLAN / Bridge Settings, tick Enable VLAN / Bridge Settings, choose Enable VLAN Tag, and set the Internet VLAN to ID 100, priority 0. Select Apply.

Still not working?

  • Check the username is the whole address, including @ezynbn.net.au, and retype the password.
  • If you turned on a VLAN, try again with it off (or the other way round).
  • Restart the NBN box and the router, then wait two minutes.
  • Still stuck? Open a ticket with your router's make and model, and a photo of the lights on the NBN box.

What's next

Steps follow Netgear's RS700 user manual (July 2025), the Orbi Pro WiFi 6 manual, and Netgear KB 30510.

Was this guide helpful?

Still stuck?

Send us the details and our team will take it from here

Open Ticket